|
|
Technological stage of the kindergarten building gross supersturcture in Slavkov u Brna
Kříž, Jiří ; Štěrba, Martin (referee) ; Motyčka, Vít (advisor)
The bachelor thesis deals with several parts of the technological stage of the gross superstructure realisation. The thesis primarily focuses on the technological implementation of the roof deck. Several other topics are also covered, namely the design concept of the building site, construction machinery and the technological process schedule. The roof deck is designed as a single-roof construction consisting of three differently composed parts. The material list, broken down to each phase of the work schedule, is included as a part of the technological prescription. Furthermore, the thesis proposes a roof drainage solution based on a concept of catchments wedges. Additionally, detailed sequences of operations for each of the work phases along with detailed solutions of the vegetative roof and waterproofing also are integral parts of the thesis.
|
|
|
Home health services - Bobrová, technological stage of roofing
Malý, Martin ; Hanzelková, Martina (referee) ; Šlanhof, Jiří (advisor)
The bachelor thesis deals with structural and technological solution to roofing of the house health services in Bobrové, in the Highlands. Addresses the implementation of a truss structure of a gable roof and a subsequent cladding. The main content of the work formed the technical report, the construction situation, the budget with the statement of assessment, technological regulation, construction site equipment, timetable, design of mechanical assembly, inspection and test plan and work safety.
|
|
|
The roof structure of the industrial hall in Kyjov
Nosková, Nela ; Pilgr, Milan (referee) ; Šmak, Milan (advisor)
The Bachelor´s thesis describes design and static assessment of the main roof structure supporting elements of the roof structure of the industrial hall in Kyjov. The hall is designed from timber. The aisle is rectangular floor plan 17,0 x 40,0 m. The main bearing structure causes as a frame truss supported by columns. Solid frame is made from solid timber C24. Purlin is designed from solid timber C24. The static calculation also includes fire resistance reports of single elements. Static analysis has been accomplished by student version of the SCIA Engineer 2012 software.
|
|
|
Risk analysis of waterproofing systems of buildings
Vepřek, Karel ; Čech, Josef (referee) ; Novák, Jindřich (advisor)
A general overview of the waterproofing materials. Distribution waterproofing systems according to their use in construction. Listing the possible risks of defects waterproofing systems. Remediation and prevention of defects in the insulation. General summary of the risk lifecycle isolation and analysis of defects in the insulating elements on the real structure.
|
|
|
Extension of the gym - preparation and organization of construction
Langrová, Petra ; Věrný, Luboš (referee) ; Vlčková, Jitka Laura (advisor)
The diploma thesis deals with the solution of selected parts of the architectural and technological project of the extension of the gym in Krnov, focusing on realization prefabricated reinformed concrete frame and roof deck. For these technological steps the control and test plan and health and safety will be prepared. For complet object SO 03 the schedule, budget, mechanical assambly, principles and organization of construction will be prepared.
|
|
|
Risk analysis and management technology phases roofs of buildings
Mík, Petr ; Bednářová, Bronislava (referee) ; Vymazal, Tomáš (advisor)
This master thesis deals with analysis and evaluation of quality, environmental and safety risks linked with two roof cover types. Malfunction analysis was carried out on the most risky roof cover component. Afterwards risk analysis was done according to ČSN EN 31010:2011 Risk management – Risk assessing techniques regulation. Following methods were chosen for risk assessment - Failure Mode and Effects Analysis (FMEA), RIPRAN method, cause-and-effect analysis (Ishikawa diagram) and Pareto chart. Using aforementioned methods, risks were identified and evaluated. Countermeasures for identified risks were suggested in conclusion.
|
|
|
The roof structure of a multipurpose sport hall in Brno
Grussmann, Jan ; Pilgr,, Milan (referee) ; Šmak, Milan (advisor)
Bachelor´s thesis describes the design and static assessment of the main roof structure supporting elements of the multipurpose sport hall in Brno. It is the emphasis on the optimization of the proposal in terms of material consumption. Curved girders made of glued laminated timber and on the edge connected rafters forms together the cross-link structure. Basis of OSB sheathing carrying the roof deck is secured by the orthogonal grid system purlins and rafters. The static calculation also includes fire resistance reports of single elements.
|
|
| |
|
|
Load carring structure of a riding hall
Lička, Vojtěch ; Šmak,, Milan (referee) ; Sýkora, Karel (advisor)
The thesis focuses on a gantry of a riding hall, which will be realized in Opava region in the village Albertovec. This hall will serve for riding competitions. Proportions of the inner riding area are 20x60 metres. The gantry is constituted by 7 cross-links, which are formed by roof trusses and plane solid columns anchored into steel bases. Individual trusses are connected by 12 metres long lattice purlins. The strength of the construction is ensured by systems of stiffeners and the subsequent cover comprises of a roof and wall cover. Above the roof surface there is a lengthwise daylight.
|
|
|
Multipurpose hall in Holice
Rückerová, Eva ; Hron, Lukáš (referee) ; Šmak, Milan (advisor)
Master´s thesis deals with the design and assessment of the roof construction of the multi-purpose hall in Holice. The other two dimensions of the hall are 28 x 45 m. Height of the hall is 11,28 m. Roofing is done in three variants. The final solution is processed for one presentation. The main supporting element is formed by cross-linking arc beam made of laminated wood. Girders are spaced 5 m and connected purlins. Stability of the construction by three field bracings. The cladding is a rafter, shuttering of OSB particle that carry the roof deck.
|
guest ::
